You’re tired of listening to cassettes and only having the capacity to listent to the radio, while your smartphone is loaded with your favourite music file but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car travels to the fullest… That’s specifically why we’ve created this article content to help you, because now you’re going to find out how to install a car radio on your Nissan Altima. To accomplish this, first of all we will find out how to remove the old car radio, then how to install a car radio on Nissan Altima and at last, how to connect it.
How to install car radio on Nissan Altima: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Nissan Altima, there is one essential task, take out the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always make sure to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is done, here are the two techniques determined by the stereo that equips your Nissan Altima:
- Original car radio:
In cases like this, you’ll have to be patient, generally, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Nissan Altima. In reality, you will need to remove certain parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections. - Aftermarket radio :
In this scenario the procedure is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Nissan Altima: Fitting and connecting the car radio
Let’s go to the most important part for you, how to install a car stereo on your Nissan Altima. Ahead of time, spend some time to verify the suitability of your car and your headunit, and to read the installation instructions, which may give you specific recommendations.
Here are the various steps involved in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the function of holding your car radio in place on your Nissan Altima, once positioned, make sure to press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Nissan Altima, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Nissan Altima, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
To find more tips on the Nissan Altima, take a look at the Nissan Altima category.
