You’re bored with listening to cassettes and only being able to enjoy the radio, while your phone is full of your preferred music but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s specifically why we’ve posted this content to help you, because right now you’re going to find out how to install a car radio on your Mitsubishi L200. To achieve this, initially we will discover how to remove the old car radio, then how to install a car radio on Mitsubishi L200 and at last, how to connect it.

install-car-radio-mitsubishi-l200

How to install car radio on Mitsubishi L200: Removing the old car stereo

Before we start the serious business of how to install a car stereo on your Mitsubishi L200, there is one fundamental step, take off the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always make sure to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is achieved, here are the two ways dependant upon the stereo that equips your Mitsubishi L200:

  • Original car radio:
    In this case, you’ll have to be persistent, in general, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your Mitsubishi L200. Indeed, you will need to remove certain auto parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections.
  • Aftermarket radio :
    In this circumstance the procedure is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Mitsubishi L200: Fitting and connecting the car radio

Let’s go to the essential step for you, how to install a car stereo on your Mitsubishi L200. Ahead of time, take the time to check the suitability of your car and your headunit, and to read the installation instructions, which may give you specific guidelines.
Here are the various actions required in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the task of holding your car radio in place on your Mitsubishi L200, once placed, make sure to press the locking tabs on each side of the frame. Once this step has been finished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Mitsubishi L200, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Mitsubishi L200, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.

To discover more tips on the Mitsubishi L200, take a look at the Mitsubishi L200 category.