You’re bored with listening to cassettes and only being able to listent to the radio, while your smartphone is full of your preferred music file but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s specifically why we’ve posted this article content to help you, because now you’re going to find out how to install a car radio on your Mercury Grand Marquis. To do this, first of all we will find out how to remove the old car radio, then how to install a car radio on Mercury Grand Marquis and to finish, how to connect it.

install-car-radio-mercury-grand-marquis

How to install car radio on Mercury Grand Marquis: Removing the old car stereo

Before we begin the serious business of how to install a car stereo on your Mercury Grand Marquis, there is one essential task, take out the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always remember to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is achieved, here are the two options dependant upon the stereo that equips your Mercury Grand Marquis:

  • Original car radio:
    In this instance, you’ll have to be persistent, generally, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your Mercury Grand Marquis. Indeed, you will need to remove certain auto parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections.
  • Aftermarket radio :
    In this scenario the process is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Mercury Grand Marquis: Fitting and connecting the car radio

Let’s go to the most important step for you, how to install a car stereo on your Mercury Grand Marquis. Before you start, take the time to examine the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific instructions.
Here are the various guidelines involved in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the role of holding your car radio in place on your Mercury Grand Marquis, once situated, remember to press the locking tabs on each side of the frame. Once this step has been finished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Mercury Grand Marquis, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Mercury Grand Marquis, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.

If perhaps you have any additional questions about the Mercury Grand Marquis, do not hesitate to consult our Mercury Grand Marquis category.