You’re bored with listening to cassettes and only having the capacity to enjoy the radio, while your phone is full of your favourite tracks but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s specifically why we’ve written and published this content page to help you, because right now you’re going to find out how to install a car radio on your Mercedes Gla. To do this, first of all we will discover how to remove the old car radio, then how to install a car radio on Mercedes Gla and at last, how to connect it.
How to install car radio on Mercedes Gla: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Mercedes Gla, there is one fundamental step, remove the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always be sure you remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is done, here are the two options depending on the stereo that equips your Mercedes Gla:
- Original car radio:
In cases like this, you’ll have to be persistent, most of the time, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your Mercedes Gla. In actual fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this circumstance the technique is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Mercedes Gla: Fitting and connecting the car radio
Let’s go to the most important part for you, how to install a car stereo on your Mercedes Gla. Beforehand, take some time to verify the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific recommendations.
Here are the various guidelines required in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the job of holding your car radio in place on your Mercedes Gla, once installed, be sure you press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Mercedes Gla, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Mercedes Gla, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
If you want more guides on the Mercedes Gla, go to our Mercedes Gla category.
