You’re sick and tired of listening to cassettes and only having the capacity to enjoy the radio, while your smartphone is loaded with your favourite music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s exactly why we’ve created this content page to help you, because now you’re going to learn about how to install a car radio on your Mercedes Classe S. To achieve this, first we will discover how to remove the old car radio, then how to install a car radio on Mercedes Classe S and finally, how to connect it.
How to install car radio on Mercedes Classe S: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Mercedes Classe S, there is one essential step, take out the audio set you currently have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start dismantling, always remember to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is completed, here are the two methods based on the stereo that equips your Mercedes Classe S:
- Original car radio:
In cases like this, you’ll have to be patient, generally, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your Mercedes Classe S. In actual fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this situation the procedure is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Mercedes Classe S: Fitting and connecting the car radio
Let’s go to the essential section for you, how to install a car stereo on your Mercedes Classe S. Ahead of time, take the time to check the compatibility of your car and your headunit, and to read the installation recommendations, which may give you specific guidelines.
Here are the various guidelines involved in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the role of holding your car radio in place on your Mercedes Classe S, once installed, remember to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Mercedes Classe S, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Mercedes Classe S, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
If you have any further questions about the Mercedes Classe S, do not hesitate to consult our Mercedes Classe S category.
