You’re bored with listening to cassettes and only having the capability to listent to the radio, while your phone is filled with your preferred tracks but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s precisely why we’ve written and published this content to help you, because right now you’re going to find out how to install a car radio on your Mercedes Classe E 4. To get this done, first we will find out how to remove the old car radio, then how to install a car radio on Mercedes Classe E 4 and at last, how to connect it.

install-car-radio-mercedes-classe-e-4

How to install car radio on Mercedes Classe E 4: Removing the old car stereo

Before we get down to the serious business of how to install a car stereo on your Mercedes Classe E 4, there is one imperative task, take away the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always be sure you remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is conducted, here are the two ways dependent on the stereo that equips your Mercedes Classe E 4:

  • Original car radio:
    In cases like this, you’ll have to be patient, most of the time, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Mercedes Classe E 4. Actually, you will need to remove certain auto parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections.
  • Aftermarket radio :
    In this scenario the method is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Mercedes Classe E 4: Fitting and connecting the car radio

Let’s go to the most important part for you, how to install a car stereo on your Mercedes Classe E 4. Before you start, take the time to verify the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific recommendations.
Here are the various guidelines required in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the job of holding your car radio in place on your Mercedes Classe E 4, once placed, be sure you press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Mercedes Classe E 4, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Mercedes Classe E 4, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.

To find more tips on the Mercedes Classe E 4, take a look at the Mercedes Classe E 4 category.