You’re bored with listening to cassettes and only having the capability to enjoy the radio, while your smartphone is full of your favourite music but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s exactly why we’ve created this article to help you, because in this article you’re going to learn about how to install a car radio on your Mercedes Classe Cls. To make this happen, initially we will find out how to remove the old car radio, then how to install a car radio on Mercedes Classe Cls and to finish, how to connect it.

install-car-radio-mercedes-classe-cls

How to install car radio on Mercedes Classe Cls: Removing the old car stereo

Before we begin the serious business of how to install a car stereo on your Mercedes Classe Cls, there is one important step, take off the audio set you already have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start taking out, always make sure to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is achieved, here are the two methods dependent on the stereo that equips your Mercedes Classe Cls:

  • Original car radio:
    In this case, you’ll have to be patient, most of the time, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your Mercedes Classe Cls. In fact, you will need to remove certain parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections.
  • Aftermarket radio :
    In this circumstance the operation is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Mercedes Classe Cls: Fitting and connecting the car radio

Let’s go to the essential section for you, how to install a car stereo on your Mercedes Classe Cls. Beforehand, take some time to check the compatibility of your car and your headunit, and to read the installation recommendations, which may give you specific guidelines.
Here are the various steps involved in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the function of holding your car radio in place on your Mercedes Classe Cls, once situated, make sure to press the locking tabs on each side of the frame. Once this step has been finished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Mercedes Classe Cls, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Mercedes Classe Cls, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.

To discover more tips on the Mercedes Classe Cls, take a look at the Mercedes Classe Cls category.