You’re uninterested in listening to cassettes and only having the ability to listent to the radio, while your phone is full of your favourite tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s precisely why we’ve written and published this content to help you, because now you’re going to learn about how to install a car radio on your Mercedes Benz C Class. To get this done, first we will see how to remove the old car radio, then how to install a car radio on Mercedes Benz C Class and at last, how to connect it.
How to install car radio on Mercedes Benz C Class: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Mercedes Benz C Class, there is one important task, take off the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always don’t forget to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is achieved, here are the two ways determined by the stereo that equips your Mercedes Benz C Class:
- Original car radio:
In this instance, you’ll have to be patient, in most cases, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Mercedes Benz C Class. In reality, you will need to remove certain parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this scenario the technique is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Mercedes Benz C Class: Fitting and connecting the car radio
Let’s go to the essential step for you, how to install a car stereo on your Mercedes Benz C Class. Ahead of time, spend some time to examine the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific recommendations.
Here are the various steps involved in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the task of holding your car radio in place on your Mercedes Benz C Class, once placed, don’t forget to press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Mercedes Benz C Class, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Mercedes Benz C Class, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
To get more tips on the Mercedes Benz C Class, take a look at the Mercedes Benz C Class category.
