You’re bored with listening to cassettes and only having the capability to listent to the radio, while your smartphone is filled with your preferred tracks but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s exactly why we’ve written and published this article content to help you, because right now you’re going to find out how to install a car radio on your Mercedes AMG GT. To do this, first we will see how to remove the old car radio, then how to install a car radio on Mercedes AMG GT and at last, how to connect it.
How to install car radio on Mercedes AMG GT: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Mercedes AMG GT, there is one important step, remove the audio set you currently have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start taking out, always be sure you remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is completed, here are the two techniques according to the stereo that equips your Mercedes AMG GT:
- Original car radio:
In this instance, you’ll have to be patient, generally, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Mercedes AMG GT. In truth, you will need to remove certain auto parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this situation the operation is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Mercedes AMG GT: Fitting and connecting the car radio
Let’s go to the essential step for you, how to install a car stereo on your Mercedes AMG GT. Beforehand, take the time to check the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific guidelines.
Here are the various steps required in installing an aftermarket car radio. To begin with, put in place the metal frame provided with your new car radio, this frame has the task of holding your car radio in place on your Mercedes AMG GT, once situated, be sure you press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Mercedes AMG GT, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Mercedes AMG GT, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
If perhaps you have any additional questions about the Mercedes AMG GT, do not hesitate to consult our Mercedes AMG GT category.
