You’re bored with listening to cassettes and only being able to listent to the radio, while your smartphone is full of your preferred music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s precisely why we’ve made this content page to help you, because in this article you’re going to find out how to install a car radio on your Mazda CX 5. To get this done, first we will discover how to remove the old car radio, then how to install a car radio on Mazda CX 5 and at last, how to connect it.
How to install car radio on Mazda CX 5: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Mazda CX 5, there is one important task, take off the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always remember to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is achieved, here are the two techniques depending on the stereo that equips your Mazda CX 5:
- Original car radio:
In cases like this, you’ll have to be persistent, in most cases, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your Mazda CX 5. Actually, you will need to remove certain parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this scenario the operation is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve completed dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Mazda CX 5: Fitting and connecting the car radio
Let’s go to the most important part for you, how to install a car stereo on your Mazda CX 5. Ahead of time, take the time to verify the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific guidelines.
Here are the various actions involved in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the job of holding your car radio in place on your Mazda CX 5, once placed, remember to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Mazda CX 5, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Mazda CX 5, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
If perhaps you have any further questions about the Mazda CX 5, do not hesitate to consult our Mazda CX 5 category.
