You’re bored with listening to cassettes and only having the capability to listent to the radio, while your smartphone is filled with your favourite tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s precisely why we’ve created this content page to help you, because right now you’re going to find out how to install a car radio on your Mazda CX 3. To accomplish this, initially we will see how to remove the old car radio, then how to install a car radio on Mazda CX 3 and finally, how to connect it.
How to install car radio on Mazda CX 3: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Mazda CX 3, there is one essential task, take away the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always remember to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is conducted, here are the two methods dependant upon the stereo that equips your Mazda CX 3:
- Original car radio:
In this instance, you’ll have to be patient, generally, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this procedure will not be enough to remove the old car radio from your Mazda CX 3. In fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this situation the process is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Mazda CX 3: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Mazda CX 3. Beforehand, take some time to verify the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific instructions.
Here are the various actions involved in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the task of holding your car radio in place on your Mazda CX 3, once situated, remember to press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Mazda CX 3, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Mazda CX 3, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
To discover more tips on the Mazda CX 3, take a look at the Mazda CX 3 category.
