You’re tired of listening to cassettes and only having the capacity to listent to the radio, while your phone is full of your preferred music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s precisely why we’ve made this content page to help you, because now you’re going to learn about how to install a car radio on your Mazda 6. To get this done, initially we will see how to remove the old car radio, then how to install a car radio on Mazda 6 and at last, how to connect it.

install-car-radio-mazda-6

How to install car radio on Mazda 6: Removing the old car stereo

Before we get down to the serious business of how to install a car stereo on your Mazda 6, there is one essential step, take away the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always remember to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is carried out, here are the two methods dependant upon the stereo that equips your Mazda 6:

  • Original car radio:
    In this instance, you’ll have to be persistent, in most cases, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Mazda 6. In actual fact, you will need to remove certain parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections.
  • Aftermarket radio :
    In this circumstance the process is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Mazda 6: Fitting and connecting the car radio

Let’s go to the essential part for you, how to install a car stereo on your Mazda 6. Before you start, spend some time to check the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific instructions.
Here are the various guidelines required in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the job of holding your car radio in place on your Mazda 6, once situated, remember to press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Mazda 6, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Mazda 6, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t think twice to visit our page dedicated to it.

To discover more tips on the Mazda 6, take a look at the Mazda 6 category.