You’re uninterested in listening to cassettes and only having the capacity to listent to the radio, while your smart phone is loaded with your favourite music but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s exactly why we’ve created this content to help you, because right now you’re going to find out how to install a car radio on your Mazda 5. To do this, first of all we will find out how to remove the old car radio, then how to install a car radio on Mazda 5 and to finish, how to connect it.
How to install car radio on Mazda 5: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Mazda 5, there is one essential task, take off the audio set you already have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start taking out, always remember to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is conducted, here are the two methods dependent on the stereo that equips your Mazda 5:
- Original car radio:
In this instance, you’ll have to be persistent, generally speaking, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your Mazda 5. Actually, you will need to remove certain auto parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this scenario the technique is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve completed dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Mazda 5: Fitting and connecting the car radio
Let’s go to the most important section for you, how to install a car stereo on your Mazda 5. Beforehand, take some time to examine the compatibility of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various steps required in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the task of holding your car radio in place on your Mazda 5, once positioned, remember to press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Mazda 5, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Mazda 5, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
If you wish more tutorials on the Mazda 5, go to our Mazda 5 category.
