You’re uninterested in listening to cassettes and only being able to enjoy the radio, while your smartphone is loaded with your favourite music file but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s specifically why we’ve written this content to help you, because right now you’re going to find out how to install a car radio on your Mazda 2. To accomplish this, first of all we will see how to remove the old car radio, then how to install a car radio on Mazda 2 and to finish, how to connect it.
How to install car radio on Mazda 2: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Mazda 2, there is one fundamental step, take off the audio set you currently have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start taking out, always don’t forget to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is completed, here are the two ways dependent on the stereo that equips your Mazda 2:
- Original car radio:
In this instance, you’ll have to be patient, in general, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Mazda 2. In reality, you will need to remove certain auto parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this situation the procedure is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Mazda 2: Fitting and connecting the car radio
Let’s go to the most important part for you, how to install a car stereo on your Mazda 2. Ahead of time, take some time to examine the suitability of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various actions involved in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the role of holding your car radio in place on your Mazda 2, once placed, don’t forget to press the locking tabs on each side of the frame. Once this step has been carried out, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Mazda 2, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Mazda 2, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
If you need more guides on the Mazda 2, go to our Mazda 2 category.
