You’re uninterested in listening to cassettes and only having the capability to enjoy the radio, while your smart phone is filled with your favourite tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s specifically why we’ve written this content to help you, because in this article you’re going to learn about how to install a car radio on your Lincoln Continental. To get this done, initially we will discover how to remove the old car radio, then how to install a car radio on Lincoln Continental and finally, how to connect it.
How to install car radio on Lincoln Continental: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Lincoln Continental, there is one necessary task, take out the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always make sure to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is done, here are the two options according to the stereo that equips your Lincoln Continental:
- Original car radio:
In this case, you’ll have to be patient, in most cases, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Lincoln Continental. Indeed, you will need to remove certain parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections. - Aftermarket radio :
In this scenario the method is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Lincoln Continental: Fitting and connecting the car radio
Let’s go to the essential step for you, how to install a car stereo on your Lincoln Continental. Beforehand, spend some time to check the suitability of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various actions involved in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the task of holding your car radio in place on your Lincoln Continental, once situated, make sure to press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Lincoln Continental, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Lincoln Continental, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
To discover more tips on the Lincoln Continental, take a look at the Lincoln Continental category.
