You’re sick and tired of listening to cassettes and only having the capability to enjoy the radio, while your smart phone is full of your preferred music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s precisely why we’ve created this content page to help you, because in this article you’re going to learn about how to install a car radio on your Lexus GS. To make this happen, initially we will see how to remove the old car radio, then how to install a car radio on Lexus GS and to finish, how to connect it.
How to install car radio on Lexus GS: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Lexus GS, there is one imperative step, remove the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always make sure to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is carried out, here are the two ways according to the stereo that equips your Lexus GS:
- Original car radio:
In cases like this, you’ll have to be patient, in most cases, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Lexus GS. In actual fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections. - Aftermarket radio :
In this situation the operation is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Lexus GS: Fitting and connecting the car radio
Let’s go to the most important section for you, how to install a car stereo on your Lexus GS. Before you start, spend some time to verify the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific guidelines.
Here are the various actions required in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the task of holding your car radio in place on your Lexus GS, once placed, make sure to press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Lexus GS, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Lexus GS, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
In the event that you have any additional questions about the Lexus GS, do not hesitate to consult our Lexus GS category.
