You’re bored with listening to cassettes and only being able to enjoy the radio, while your smartphone is filled with your preferred tracks but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s exactly why we’ve written this content page to help you, because in this article you’re going to learn about how to install a car radio on your Lexus ES. To accomplish this, first we will discover how to remove the old car radio, then how to install a car radio on Lexus ES and at last, how to connect it.

install-car-radio-lexus-es

How to install car radio on Lexus ES: Removing the old car stereo

Before we begin the serious business of how to install a car stereo on your Lexus ES, there is one imperative step, take out the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always don’t forget to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is achieved, here are the two ways based on the stereo that equips your Lexus ES:

  • Original car radio:
    In this instance, you’ll have to be patient, in general, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this procedure will not be enough to remove the old car radio from your Lexus ES. Actually, you will need to remove certain parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections.
  • Aftermarket radio :
    In this situation the technique is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Lexus ES: Fitting and connecting the car radio

Let’s go to the essential step for you, how to install a car stereo on your Lexus ES. Before you start, take the time to examine the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific recommendations.
Here are the various guidelines required in installing an aftermarket car radio. Firstly, put in place the metal frame supplied with your new car radio, this frame has the function of holding your car radio in place on your Lexus ES, once placed, don’t forget to press the locking tabs on each side of the frame. Once this step has been finished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Lexus ES, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Lexus ES, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.

If you want more guides on the Lexus ES, go to our Lexus ES category.