You’re sick and tired of listening to cassettes and only having the capacity to listent to the radio, while your smart phone is full of your favourite tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car travels to the fullest… That’s precisely why we’ve made this article content to help you, because in this article you’re going to find out how to install a car radio on your Land Rover Range Rover. To make this happen, first of all we will see how to remove the old car radio, then how to install a car radio on Land Rover Range Rover and finally, how to connect it.
How to install car radio on Land Rover Range Rover: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Land Rover Range Rover, there is one imperative task, take out the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always don’t forget to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is carried out, here are the two methods dependent on the stereo that equips your Land Rover Range Rover:
- Original car radio:
In this instance, you’ll have to be persistent, generally speaking, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Land Rover Range Rover. Actually, you will need to remove certain parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this situation the operation is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Land Rover Range Rover: Fitting and connecting the car radio
Let’s go to the most important section for you, how to install a car stereo on your Land Rover Range Rover. Beforehand, spend some time to verify the suitability of your car and your headunit, and to read the installation information, which may give you specific guidelines.
Here are the various steps involved in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the job of holding your car radio in place on your Land Rover Range Rover, once placed, don’t forget to press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Land Rover Range Rover, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Land Rover Range Rover, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
In the event that you have any further questions about the Land Rover Range Rover, do not hesitate to consult our Land Rover Range Rover category.
