You’re tired of listening to cassettes and only having the capability to listent to the radio, while your smartphone is filled with your preferred music but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s exactly why we’ve written and published this article to help you, because right now you’re going to find out how to install a car radio on your Land Rover Evoque. To accomplish this, initially we will find out how to remove the old car radio, then how to install a car radio on Land Rover Evoque and finally, how to connect it.
How to install car radio on Land Rover Evoque: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Land Rover Evoque, there is one important task, take out the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always make sure to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is completed, here are the two methods dependant upon the stereo that equips your Land Rover Evoque:
- Original car radio:
In this case, you’ll have to be patient, generally speaking, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Land Rover Evoque. In reality, you will need to remove certain parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections. - Aftermarket radio :
In this circumstance the procedure is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Land Rover Evoque: Fitting and connecting the car radio
Let’s go to the most important part for you, how to install a car stereo on your Land Rover Evoque. Before you start, spend some time to examine the compatibility of your car and your headunit, and to read the installation instructions, which may give you specific guidelines.
Here are the various actions involved in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the task of holding your car radio in place on your Land Rover Evoque, once positioned, make sure to press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Land Rover Evoque, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Land Rover Evoque, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
To find more tips on the Land Rover Evoque, take a look at the Land Rover Evoque category.
