You’re uninterested in listening to cassettes and only having the capacity to listent to the radio, while your smart phone is loaded with your favourite music file but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s precisely why we’ve written this article content to help you, because in this article you’re going to find out how to install a car radio on your Jeep Renegade. To accomplish this, first of all we will find out how to remove the old car radio, then how to install a car radio on Jeep Renegade and finally, how to connect it.

install-car-radio-jeep-renegade

How to install car radio on Jeep Renegade: Removing the old car stereo

Before we start the serious business of how to install a car stereo on your Jeep Renegade, there is one necessary step, remove the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always remember to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is carried out, here are the two solutions dependant upon the stereo that equips your Jeep Renegade:

  • Original car radio:
    In this case, you’ll have to be persistent, generally, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this procedure will not be enough to remove the old car radio from your Jeep Renegade. Actually, you will need to remove certain parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections.
  • Aftermarket radio :
    In this circumstance the technique is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Jeep Renegade: Fitting and connecting the car radio

Let’s go to the most important step for you, how to install a car stereo on your Jeep Renegade. Beforehand, take the time to check the compatibility of your car and your headunit, and to read the installation instructions, which may give you specific instructions.
Here are the various steps involved in installing an aftermarket car radio. To begin with, put in place the metal frame provided with your new car radio, this frame has the role of holding your car radio in place on your Jeep Renegade, once positioned, remember to press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Jeep Renegade, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Jeep Renegade, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.

To get more tips on the Jeep Renegade, take a look at the Jeep Renegade category.