You’re tired of listening to cassettes and only having the ability to enjoy the radio, while your phone is loaded with your preferred music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s exactly why we’ve written this article content to help you, because in this article you’re going to learn about how to install a car radio on your Infiniti QX70. To make this happen, first of all we will see how to remove the old car radio, then how to install a car radio on Infiniti QX70 and finally, how to connect it.
How to install car radio on Infiniti QX70: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Infiniti QX70, there is one necessary step, take off the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always be sure you remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is carried out, here are the two ways depending on the stereo that equips your Infiniti QX70:
- Original car radio:
In this instance, you’ll have to be persistent, in most cases, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Infiniti QX70. Actually, you will need to remove certain parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this circumstance the process is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve completed dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Infiniti QX70: Fitting and connecting the car radio
Let’s go to the essential section for you, how to install a car stereo on your Infiniti QX70. Beforehand, take some time to verify the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific instructions.
Here are the various actions involved in installing an aftermarket car radio. Firstly, put in place the metal frame supplied with your new car radio, this frame has the task of holding your car radio in place on your Infiniti QX70, once positioned, be sure you press the locking tabs on each side of the frame. Once this step has been carried out, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Infiniti QX70, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Infiniti QX70, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
If you have any additional questions about the Infiniti QX70, do not hesitate to consult our Infiniti QX70 category.
