You’re uninterested in listening to cassettes and only having the ability to enjoy the radio, while your smart phone is loaded with your preferred tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s specifically why we’ve written and published this article to help you, because right now you’re going to learn about how to install a car radio on your Hyundai Veloster. To accomplish this, first of all we will discover how to remove the old car radio, then how to install a car radio on Hyundai Veloster and finally, how to connect it.
How to install car radio on Hyundai Veloster: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Hyundai Veloster, there is one essential task, take out the audio set you already have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start dismantling, always make sure to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is achieved, here are the two ways determined by the stereo that equips your Hyundai Veloster:
- Original car radio:
In this instance, you’ll have to be patient, generally speaking, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Hyundai Veloster. In fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections. - Aftermarket radio :
In this scenario the method is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Hyundai Veloster: Fitting and connecting the car radio
Let’s go to the essential step for you, how to install a car stereo on your Hyundai Veloster. Beforehand, take some time to examine the compatibility of your car and your headunit, and to read the installation recommendations, which may give you specific guidelines.
Here are the various steps involved in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the function of holding your car radio in place on your Hyundai Veloster, once situated, make sure to press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Hyundai Veloster, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Hyundai Veloster, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
If you need more guides on the Hyundai Veloster, go to our Hyundai Veloster category.
