You’re uninterested in listening to cassettes and only having the capacity to listent to the radio, while your smartphone is loaded with your favourite music but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s exactly why we’ve created this article content to help you, because in this article you’re going to find out how to install a car radio on your Hyundai Sonata. To accomplish this, initially we will see how to remove the old car radio, then how to install a car radio on Hyundai Sonata and finally, how to connect it.
How to install car radio on Hyundai Sonata: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Hyundai Sonata, there is one fundamental task, remove the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always be sure you remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is achieved, here are the two methods based on the stereo that equips your Hyundai Sonata:
- Original car radio:
In this case, you’ll have to be persistent, in most cases, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Hyundai Sonata. In truth, you will need to remove certain parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this scenario the technique is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Hyundai Sonata: Fitting and connecting the car radio
Let’s go to the most important part for you, how to install a car stereo on your Hyundai Sonata. Before you start, take the time to examine the compatibility of your car and your headunit, and to read the installation recommendations, which may give you specific guidelines.
Here are the various guidelines involved in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the job of holding your car radio in place on your Hyundai Sonata, once placed, be sure you press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Hyundai Sonata, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Hyundai Sonata, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
If you want more tutorials on the Hyundai Sonata, go to our Hyundai Sonata category.
