You’re sick and tired of listening to cassettes and only being able to enjoy the radio, while your smart phone is full of your favourite tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s specifically why we’ve written this content page to help you, because right now you’re going to learn about how to install a car radio on your Hyundai Ioniq. To do this, first of all we will discover how to remove the old car radio, then how to install a car radio on Hyundai Ioniq and at last, how to connect it.

install-car-radio-hyundai-ioniq

How to install car radio on Hyundai Ioniq: Removing the old car stereo

Before we start the serious business of how to install a car stereo on your Hyundai Ioniq, there is one essential step, remove the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always be sure you remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is done, here are the two techniques depending on the stereo that equips your Hyundai Ioniq:

  • Original car radio:
    In cases like this, you’ll have to be patient, in general, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your Hyundai Ioniq. In actual fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections.
  • Aftermarket radio :
    In this circumstance the technique is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve completed dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Hyundai Ioniq: Fitting and connecting the car radio

Let’s go to the essential section for you, how to install a car stereo on your Hyundai Ioniq. Beforehand, spend some time to verify the suitability of your car and your headunit, and to read the installation information, which may give you specific recommendations.
Here are the various actions involved in installing an aftermarket car radio. Firstly, put in place the metal frame supplied with your new car radio, this frame has the job of holding your car radio in place on your Hyundai Ioniq, once placed, be sure you press the locking tabs on each side of the frame. Once this step has been finished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Hyundai Ioniq, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Hyundai Ioniq, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.

To get more tips on the Hyundai Ioniq, take a look at the Hyundai Ioniq category.