You’re tired of listening to cassettes and only being able to enjoy the radio, while your smartphone is filled with your preferred tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s precisely why we’ve made this content page to help you, because in this article you’re going to find out how to install a car radio on your hyundai i20. To get this done, first of all we will discover how to remove the old car radio, then how to install a car radio on hyundai i20 and to finish, how to connect it.

install-car-radio-hyundai-i20

How to install car radio on hyundai i20: Removing the old car stereo

Before we start the serious business of how to install a car stereo on your hyundai i20, there is one fundamental task, take out the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always make sure to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is conducted, here are the two solutions determined by the stereo that equips your hyundai i20:

  • Original car radio:
    In this instance, you’ll have to be patient, in general, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your hyundai i20. In reality, you will need to remove certain parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections.
  • Aftermarket radio :
    In this circumstance the method is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your hyundai i20: Fitting and connecting the car radio

Let’s go to the essential section for you, how to install a car stereo on your hyundai i20. Ahead of time, spend some time to check the suitability of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various guidelines involved in installing an aftermarket car radio. Firstly, put in place the metal frame supplied with your new car radio, this frame has the task of holding your car radio in place on your hyundai i20, once installed, make sure to press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your hyundai i20, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on hyundai i20, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.

If perhaps you have any further questions about the hyundai i20, do not hesitate to consult our hyundai i20 category.