You’re sick and tired of listening to cassettes and only having the capability to listent to the radio, while your smart phone is filled with your preferred music but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s specifically why we’ve made this article content to help you, because in this article you’re going to learn about how to install a car radio on your hyundai getz. To accomplish this, first of all we will see how to remove the old car radio, then how to install a car radio on hyundai getz and to finish, how to connect it.

install-car-radio-hyundai-getz

How to install car radio on hyundai getz: Removing the old car stereo

Before we start the serious business of how to install a car stereo on your hyundai getz, there is one fundamental task, remove the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always don’t forget to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is carried out, here are the two solutions determined by the stereo that equips your hyundai getz:

  • Original car radio:
    In cases like this, you’ll have to be patient, most of the time, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your hyundai getz. In fact, you will need to remove certain parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections.
  • Aftermarket radio :
    In this circumstance the process is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your hyundai getz: Fitting and connecting the car radio

Let’s go to the most important part for you, how to install a car stereo on your hyundai getz. Ahead of time, spend some time to check the suitability of your car and your headunit, and to read the installation information, which may give you specific recommendations.
Here are the various steps required in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the task of holding your car radio in place on your hyundai getz, once situated, don’t forget to press the locking tabs on each side of the frame. Once this step has been carried out, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your hyundai getz, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on hyundai getz, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t think twice to visit our page dedicated to it.

If perhaps you have any additional questions about the hyundai getz, do not hesitate to consult our hyundai getz category.