You’re uninterested in listening to cassettes and only having the ability to enjoy the radio, while your smart phone is loaded with your preferred tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s specifically why we’ve written this article content to help you, because right now you’re going to learn about how to install a car radio on your Honda Ridgeline. To accomplish this, initially we will find out how to remove the old car radio, then how to install a car radio on Honda Ridgeline and to finish, how to connect it.
How to install car radio on Honda Ridgeline: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Honda Ridgeline, there is one imperative step, take out the audio set you already have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start dismantling, always remember to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is conducted, here are the two options based on the stereo that equips your Honda Ridgeline:
- Original car radio:
In cases like this, you’ll have to be persistent, generally, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this procedure will not be enough to remove the old car radio from your Honda Ridgeline. In actual fact, you will need to remove certain parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this circumstance the technique is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Honda Ridgeline: Fitting and connecting the car radio
Let’s go to the essential section for you, how to install a car stereo on your Honda Ridgeline. Beforehand, spend some time to check the compatibility of your car and your headunit, and to read the installation instructions, which may give you specific guidelines.
Here are the various steps involved in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the role of holding your car radio in place on your Honda Ridgeline, once placed, remember to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Honda Ridgeline, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Honda Ridgeline, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
In the event that you have any further questions about the Honda Ridgeline, do not hesitate to consult our Honda Ridgeline category.
