You’re tired of listening to cassettes and only having the capability to listent to the radio, while your smart phone is loaded with your favourite tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s specifically why we’ve written this article content to help you, because in this article you’re going to find out how to install a car radio on your GMC Yukon. To make this happen, first of all we will see how to remove the old car radio, then how to install a car radio on GMC Yukon and to finish, how to connect it.
How to install car radio on GMC Yukon: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your GMC Yukon, there is one fundamental task, take out the audio set you currently have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start taking out, always make sure to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is completed, here are the two techniques based on the stereo that equips your GMC Yukon:
- Original car radio:
In this instance, you’ll have to be patient, in most cases, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your GMC Yukon. In actual fact, you will need to remove certain parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections. - Aftermarket radio :
In this circumstance the procedure is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve completed dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your GMC Yukon: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your GMC Yukon. Beforehand, take some time to verify the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific guidelines.
Here are the various guidelines required in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the role of holding your car radio in place on your GMC Yukon, once placed, make sure to press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your GMC Yukon, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on GMC Yukon, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
To get more tips on the GMC Yukon, take a look at the GMC Yukon category.
