You’re uninterested in listening to cassettes and only having the capability to listent to the radio, while your phone is full of your favourite music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s specifically why we’ve written this content page to help you, because now you’re going to find out how to install a car radio on your GMC Terrain. To do this, first we will see how to remove the old car radio, then how to install a car radio on GMC Terrain and at last, how to connect it.
How to install car radio on GMC Terrain: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your GMC Terrain, there is one fundamental task, take off the audio set you already have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start taking out, always don’t forget to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is achieved, here are the two techniques according to the stereo that equips your GMC Terrain:
- Original car radio:
In this instance, you’ll have to be persistent, in general, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your GMC Terrain. In truth, you will need to remove certain parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this scenario the operation is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your GMC Terrain: Fitting and connecting the car radio
Let’s go to the essential step for you, how to install a car stereo on your GMC Terrain. Before you start, spend some time to examine the compatibility of your car and your headunit, and to read the installation recommendations, which may give you specific guidelines.
Here are the various guidelines involved in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the role of holding your car radio in place on your GMC Terrain, once installed, don’t forget to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your GMC Terrain, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on GMC Terrain, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
To get more tips on the GMC Terrain, take a look at the GMC Terrain category.
