You’re bored with listening to cassettes and only having the capacity to enjoy the radio, while your smartphone is full of your preferred music but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s specifically why we’ve made this content to help you, because now you’re going to learn about how to install a car radio on your Ford Ranger. To achieve this, first we will discover how to remove the old car radio, then how to install a car radio on Ford Ranger and at last, how to connect it.

install-car-radio-ford-ranger

How to install car radio on Ford Ranger: Removing the old car stereo

Before we get down to the serious business of how to install a car stereo on your Ford Ranger, there is one imperative task, remove the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always remember to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is achieved, here are the two solutions depending on the stereo that equips your Ford Ranger:

  • Original car radio:
    In this case, you’ll have to be persistent, generally, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Ford Ranger. In actual fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections.
  • Aftermarket radio :
    In this scenario the procedure is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Ford Ranger: Fitting and connecting the car radio

Let’s go to the essential section for you, how to install a car stereo on your Ford Ranger. Before you start, take the time to verify the suitability of your car and your headunit, and to read the installation instructions, which may give you specific instructions.
Here are the various guidelines required in installing an aftermarket car radio. Firstly, put in place the metal frame supplied with your new car radio, this frame has the task of holding your car radio in place on your Ford Ranger, once placed, remember to press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Ford Ranger, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Ford Ranger, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t think twice to visit our page dedicated to it.

To discover more tips on the Ford Ranger, take a look at the Ford Ranger category.