You’re tired of listening to cassettes and only having the capacity to enjoy the radio, while your phone is filled with your favourite music file but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s specifically why we’ve created this article content to help you, because in this article you’re going to learn about how to install a car radio on your Ford Puma. To do this, first of all we will see how to remove the old car radio, then how to install a car radio on Ford Puma and finally, how to connect it.
How to install car radio on Ford Puma: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Ford Puma, there is one imperative step, remove the audio set you already have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start taking out, always make sure to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is done, here are the two solutions depending on the stereo that equips your Ford Puma:
- Original car radio:
In cases like this, you’ll have to be patient, most of the time, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Ford Puma. In fact, you will need to remove certain parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections. - Aftermarket radio :
In this situation the procedure is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Ford Puma: Fitting and connecting the car radio
Let’s go to the essential step for you, how to install a car stereo on your Ford Puma. Before you start, take the time to check the compatibility of your car and your headunit, and to read the installation instructions, which may give you specific instructions.
Here are the various steps involved in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the function of holding your car radio in place on your Ford Puma, once situated, make sure to press the locking tabs on each side of the frame. Once this step has been carried out, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Ford Puma, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Ford Puma, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
If perhaps you have any additional questions about the Ford Puma, do not hesitate to consult our Ford Puma category.
