You’re tired of listening to cassettes and only having the ability to enjoy the radio, while your smart phone is filled with your favourite music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s specifically why we’ve written this content page to help you, because now you’re going to learn about how to install a car radio on your Ford Ka. To accomplish this, first we will find out how to remove the old car radio, then how to install a car radio on Ford Ka and to finish, how to connect it.
How to install car radio on Ford Ka: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Ford Ka, there is one imperative task, remove the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always be sure you remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is achieved, here are the two solutions dependant upon the stereo that equips your Ford Ka:
- Original car radio:
In this case, you’ll have to be patient, in general, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this procedure will not be enough to remove the old car radio from your Ford Ka. In actual fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections.
- Aftermarket radio :
In this situation the procedure is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Ford Ka: Fitting and connecting the car radio
Let’s go to the essential section for you, how to install a car stereo on your Ford Ka. Ahead of time, spend some time to verify the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific guidelines.
Here are the various steps involved in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the function of holding your car radio in place on your Ford Ka, once situated, be sure you press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Ford Ka, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Ford Ka, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
If you wish more guides on the Ford Ka, go to our Ford Ka category.