You’re sick and tired of listening to cassettes and only having the capacity to listent to the radio, while your phone is filled with your preferred music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car travels to the fullest… That’s exactly why we’ve created this article content to help you, because now you’re going to learn about how to install a car radio on your Ford Fusion. To accomplish this, first of all we will find out how to remove the old car radio, then how to install a car radio on Ford Fusion and finally, how to connect it.

install-car-radio-ford-fusion

How to install car radio on Ford Fusion: Removing the old car stereo

Before we start the serious business of how to install a car stereo on your Ford Fusion, there is one fundamental task, take off the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always be sure you remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is done, here are the two methods depending on the stereo that equips your Ford Fusion:

  • Original car radio:
    In cases like this, you’ll have to be persistent, in general, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your Ford Fusion. In actual fact, you will need to remove certain parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections.
  • Aftermarket radio :
    In this situation the process is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Ford Fusion: Fitting and connecting the car radio

Let’s go to the essential section for you, how to install a car stereo on your Ford Fusion. Beforehand, take the time to check the compatibility of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various guidelines involved in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the job of holding your car radio in place on your Ford Fusion, once installed, be sure you press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Ford Fusion, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Ford Fusion, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.

In the event that you have any additional questions about the Ford Fusion, do not hesitate to consult our Ford Fusion category.