You’re tired of listening to cassettes and only having the capacity to enjoy the radio, while your smartphone is loaded with your preferred music file but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s specifically why we’ve posted this article content to help you, because now you’re going to learn about how to install a car radio on your Fiat Punto 2. To get this done, initially we will find out how to remove the old car radio, then how to install a car radio on Fiat Punto 2 and to finish, how to connect it.
How to install car radio on Fiat Punto 2: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Fiat Punto 2, there is one imperative task, take off the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always remember to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is carried out, here are the two techniques determined by the stereo that equips your Fiat Punto 2:
- Original car radio:
In cases like this, you’ll have to be patient, most of the time, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your Fiat Punto 2. In fact, you will need to remove certain parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this scenario the process is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Fiat Punto 2: Fitting and connecting the car radio
Let’s go to the most important section for you, how to install a car stereo on your Fiat Punto 2. Beforehand, spend some time to verify the compatibility of your car and your headunit, and to read the installation information, which may give you specific recommendations.
Here are the various steps involved in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the role of holding your car radio in place on your Fiat Punto 2, once positioned, remember to press the locking tabs on each side of the frame. Once this step has been carried out, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Fiat Punto 2, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Fiat Punto 2, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
If you have any further questions about the Fiat Punto 2, do not hesitate to consult our Fiat Punto 2 category.
