You’re tired of listening to cassettes and only being able to enjoy the radio, while your smartphone is loaded with your preferred tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s exactly why we’ve written this article content to help you, because right now you’re going to find out how to install a car radio on your Fiat Bravo 2. To accomplish this, initially we will discover how to remove the old car radio, then how to install a car radio on Fiat Bravo 2 and at last, how to connect it.
How to install car radio on Fiat Bravo 2: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Fiat Bravo 2, there is one necessary task, take off the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always remember to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is achieved, here are the two ways dependent on the stereo that equips your Fiat Bravo 2:
- Original car radio:
In this instance, you’ll have to be patient, generally speaking, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your Fiat Bravo 2. In actual fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this scenario the procedure is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Fiat Bravo 2: Fitting and connecting the car radio
Let’s go to the essential part for you, how to install a car stereo on your Fiat Bravo 2. Ahead of time, take some time to check the compatibility of your car and your headunit, and to read the installation recommendations, which may give you specific instructions.
Here are the various actions required in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the task of holding your car radio in place on your Fiat Bravo 2, once situated, remember to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Fiat Bravo 2, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Fiat Bravo 2, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
In the event that you have any additional questions about the Fiat Bravo 2, do not hesitate to consult our Fiat Bravo 2 category.
