You’re uninterested in listening to cassettes and only having the capability to listent to the radio, while your phone is filled with your favourite music but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s specifically why we’ve made this content to help you, because in this article you’re going to learn about how to install a car radio on your Ds Ds 7 Crossback. To accomplish this, first of all we will find out how to remove the old car radio, then how to install a car radio on Ds Ds 7 Crossback and at last, how to connect it.
How to install car radio on Ds Ds 7 Crossback: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Ds Ds 7 Crossback, there is one essential task, take off the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always remember to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is completed, here are the two options depending on the stereo that equips your Ds Ds 7 Crossback:
- Original car radio:
In this case, you’ll have to be patient, in most cases, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your Ds Ds 7 Crossback. In actual fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections.
- Aftermarket radio :
In this scenario the process is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Ds Ds 7 Crossback: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Ds Ds 7 Crossback. Beforehand, spend some time to verify the compatibility of your car and your headunit, and to read the installation recommendations, which may give you specific instructions.
Here are the various guidelines involved in installing an aftermarket car radio. To begin with, put in place the metal frame provided with your new car radio, this frame has the role of holding your car radio in place on your Ds Ds 7 Crossback, once situated, remember to press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Ds Ds 7 Crossback, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Ds Ds 7 Crossback, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
To find more tips on the Ds Ds 7 Crossback, take a look at the Ds Ds 7 Crossback category.