You’re uninterested in listening to cassettes and only having the capacity to listent to the radio, while your smartphone is full of your preferred music but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s exactly why we’ve made this content to help you, because in this article you’re going to find out how to install a car radio on your Dodge Journey. To get this done, initially we will find out how to remove the old car radio, then how to install a car radio on Dodge Journey and to finish, how to connect it.
How to install car radio on Dodge Journey: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Dodge Journey, there is one imperative task, take away the audio set you already have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start taking out, always remember to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is carried out, here are the two techniques based on the stereo that equips your Dodge Journey:
- Original car radio:
In this case, you’ll have to be patient, in most cases, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Dodge Journey. Indeed, you will need to remove certain auto parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this scenario the technique is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Dodge Journey: Fitting and connecting the car radio
Let’s go to the most important section for you, how to install a car stereo on your Dodge Journey. Ahead of time, take the time to check the suitability of your car and your headunit, and to read the installation information, which may give you specific guidelines.
Here are the various actions involved in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the job of holding your car radio in place on your Dodge Journey, once installed, remember to press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Dodge Journey, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Dodge Journey, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
If you wish more tutorials on the Dodge Journey, go to our Dodge Journey category.
