You’re bored with listening to cassettes and only having the ability to listent to the radio, while your smartphone is filled with your favourite music but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s specifically why we’ve created this article content to help you, because now you’re going to learn about how to install a car radio on your Dodge Durango. To accomplish this, initially we will discover how to remove the old car radio, then how to install a car radio on Dodge Durango and to finish, how to connect it.

install-car-radio-dodge-durango

How to install car radio on Dodge Durango: Removing the old car stereo

Before we get down to the serious business of how to install a car stereo on your Dodge Durango, there is one essential step, remove the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always remember to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is achieved, here are the two options according to the stereo that equips your Dodge Durango:

  • Original car radio:
    In this instance, you’ll have to be persistent, in general, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Dodge Durango. In fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections.
  • Aftermarket radio :
    In this situation the procedure is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Dodge Durango: Fitting and connecting the car radio

Let’s go to the essential step for you, how to install a car stereo on your Dodge Durango. Before you start, take some time to verify the suitability of your car and your headunit, and to read the installation instructions, which may give you specific instructions.
Here are the various guidelines required in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the job of holding your car radio in place on your Dodge Durango, once placed, remember to press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Dodge Durango, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Dodge Durango, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.

Whenever you have any further questions about the Dodge Durango, do not hesitate to consult our Dodge Durango category.