You’re uninterested in listening to cassettes and only having the capacity to listent to the radio, while your phone is full of your preferred music but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s exactly why we’ve created this article to help you, because right now you’re going to find out how to install a car radio on your Dodge Dart. To make this happen, first of all we will discover how to remove the old car radio, then how to install a car radio on Dodge Dart and finally, how to connect it.
How to install car radio on Dodge Dart: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Dodge Dart, there is one essential step, take off the audio set you currently have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start taking out, always make sure to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is achieved, here are the two ways depending on the stereo that equips your Dodge Dart:
- Original car radio:
In this instance, you’ll have to be persistent, generally, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Dodge Dart. In reality, you will need to remove certain auto parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections. - Aftermarket radio :
In this scenario the process is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Dodge Dart: Fitting and connecting the car radio
Let’s go to the essential step for you, how to install a car stereo on your Dodge Dart. Beforehand, spend some time to check the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific recommendations.
Here are the various guidelines involved in installing an aftermarket car radio. Firstly, put in place the metal frame supplied with your new car radio, this frame has the task of holding your car radio in place on your Dodge Dart, once installed, make sure to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Dodge Dart, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Dodge Dart, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
To discover more tips on the Dodge Dart, take a look at the Dodge Dart category.
