You’re bored with listening to cassettes and only being able to enjoy the radio, while your smartphone is filled with your favourite music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s precisely why we’ve written this content to help you, because now you’re going to learn about how to install a car radio on your Dodge Challenger. To do this, first of all we will find out how to remove the old car radio, then how to install a car radio on Dodge Challenger and to finish, how to connect it.
How to install car radio on Dodge Challenger: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Dodge Challenger, there is one imperative step, take away the audio set you currently have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start taking out, always make sure to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is done, here are the two ways according to the stereo that equips your Dodge Challenger:
- Original car radio:
In this instance, you’ll have to be patient, in most cases, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Dodge Challenger. In truth, you will need to remove certain parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections. - Aftermarket radio :
In this situation the procedure is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Dodge Challenger: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Dodge Challenger. Before you start, take the time to examine the suitability of your car and your headunit, and to read the installation instructions, which may give you specific instructions.
Here are the various actions required in installing an aftermarket car radio. Firstly, put in place the metal frame supplied with your new car radio, this frame has the role of holding your car radio in place on your Dodge Challenger, once installed, make sure to press the locking tabs on each side of the frame. Once this step has been finished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Dodge Challenger, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Dodge Challenger, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
If you have any additional questions about the Dodge Challenger, do not hesitate to consult our Dodge Challenger category.
