You’re tired of listening to cassettes and only having the ability to listent to the radio, while your smartphone is loaded with your favourite music but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car travels to the fullest… That’s specifically why we’ve written and published this content to help you, because in this article you’re going to find out how to install a car radio on your Dodge Caliber. To make this happen, first of all we will discover how to remove the old car radio, then how to install a car radio on Dodge Caliber and at last, how to connect it.
How to install car radio on Dodge Caliber: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Dodge Caliber, there is one necessary step, remove the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always make sure to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is completed, here are the two ways dependant upon the stereo that equips your Dodge Caliber:
- Original car radio:
In cases like this, you’ll have to be patient, most of the time, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this procedure will not be enough to remove the old car radio from your Dodge Caliber. In truth, you will need to remove certain parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections. - Aftermarket radio :
In this scenario the procedure is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Dodge Caliber: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Dodge Caliber. Beforehand, spend some time to check the suitability of your car and your headunit, and to read the installation instructions, which may give you specific guidelines.
Here are the various actions required in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the role of holding your car radio in place on your Dodge Caliber, once placed, make sure to press the locking tabs on each side of the frame. Once this step has been finished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Dodge Caliber, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Dodge Caliber, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
Whenever you have any additional questions about the Dodge Caliber, do not hesitate to consult our Dodge Caliber category.
