You’re tired of listening to cassettes and only having the capacity to listent to the radio, while your smart phone is filled with your favourite tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s specifically why we’ve written this article content to help you, because now you’re going to learn about how to install a car radio on your Citroen Xsara. To do this, first we will find out how to remove the old car radio, then how to install a car radio on Citroen Xsara and to finish, how to connect it.

install-car-radio-citroen-xsara

How to install car radio on Citroen Xsara: Removing the old car stereo

Before we get down to the serious business of how to install a car stereo on your Citroen Xsara, there is one imperative step, take out the audio set you already have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start dismantling, always be sure you remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is completed, here are the two options dependant upon the stereo that equips your Citroen Xsara:

  • Original car radio:
    In this instance, you’ll have to be patient, in most cases, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this procedure will not be enough to remove the old car radio from your Citroen Xsara. Actually, you will need to remove certain auto parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections.
  • Aftermarket radio :
    In this scenario the technique is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Citroen Xsara: Fitting and connecting the car radio

Let’s go to the most important section for you, how to install a car stereo on your Citroen Xsara. Before you start, take some time to examine the suitability of your car and your headunit, and to read the installation information, which may give you specific guidelines.
Here are the various steps required in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the function of holding your car radio in place on your Citroen Xsara, once positioned, be sure you press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Citroen Xsara, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Citroen Xsara, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.

To find more tips on the Citroen Xsara, take a look at the Citroen Xsara category.