You’re uninterested in listening to cassettes and only having the ability to listent to the radio, while your smart phone is full of your preferred music but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s precisely why we’ve posted this content page to help you, because now you’re going to find out how to install a car radio on your Citroen Jumpy 2. To make this happen, first we will see how to remove the old car radio, then how to install a car radio on Citroen Jumpy 2 and finally, how to connect it.

install-car-radio-citroen-jumpy-2

How to install car radio on Citroen Jumpy 2: Removing the old car stereo

Before we begin the serious business of how to install a car stereo on your Citroen Jumpy 2, there is one imperative task, take out the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always remember to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is carried out, here are the two solutions dependent on the stereo that equips your Citroen Jumpy 2:

  • Original car radio:
    In cases like this, you’ll have to be persistent, in general, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this procedure will not be enough to remove the old car radio from your Citroen Jumpy 2. In fact, you will need to remove certain parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections.
  • Aftermarket radio :
    In this circumstance the technique is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Citroen Jumpy 2: Fitting and connecting the car radio

Let’s go to the most important part for you, how to install a car stereo on your Citroen Jumpy 2. Before you start, spend some time to examine the compatibility of your car and your headunit, and to read the installation instructions, which may give you specific recommendations.
Here are the various guidelines required in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the task of holding your car radio in place on your Citroen Jumpy 2, once placed, remember to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Citroen Jumpy 2, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Citroen Jumpy 2, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t think twice to visit our page dedicated to it.

To find more tips on the Citroen Jumpy 2, take a look at the Citroen Jumpy 2 category.