You’re sick and tired of listening to cassettes and only having the ability to enjoy the radio, while your smartphone is filled with your preferred music but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s precisely why we’ve made this article to help you, because now you’re going to learn about how to install a car radio on your Citroen Jumper. To get this done, initially we will see how to remove the old car radio, then how to install a car radio on Citroen Jumper and to finish, how to connect it.

install-car-radio-citroen-jumper

How to install car radio on Citroen Jumper: Removing the old car stereo

Before we start the serious business of how to install a car stereo on your Citroen Jumper, there is one important task, remove the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always be sure you remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is carried out, here are the two methods depending on the stereo that equips your Citroen Jumper:

  • Original car radio:
    In this instance, you’ll have to be persistent, in most cases, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your Citroen Jumper. In actual fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections.
  • Aftermarket radio :
    In this situation the procedure is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Citroen Jumper: Fitting and connecting the car radio

Let’s go to the most important part for you, how to install a car stereo on your Citroen Jumper. Before you start, take the time to verify the compatibility of your car and your headunit, and to read the installation instructions, which may give you specific instructions.
Here are the various guidelines involved in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the role of holding your car radio in place on your Citroen Jumper, once installed, be sure you press the locking tabs on each side of the frame. Once this step has been carried out, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Citroen Jumper, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Citroen Jumper, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.

If you have any further questions about the Citroen Jumper, do not hesitate to consult our Citroen Jumper category.