You’re tired of listening to cassettes and only being able to listent to the radio, while your smartphone is loaded with your preferred music but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s specifically why we’ve created this article to help you, because in this article you’re going to find out how to install a car radio on your Citroen C-crosser. To accomplish this, initially we will discover how to remove the old car radio, then how to install a car radio on Citroen C-crosser and to finish, how to connect it.
How to install car radio on Citroen C-crosser: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Citroen C-crosser, there is one necessary task, take out the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always be sure you remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is achieved, here are the two techniques determined by the stereo that equips your Citroen C-crosser:
- Original car radio:
In this case, you’ll have to be persistent, in general, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Citroen C-crosser. Actually, you will need to remove certain parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this situation the operation is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Citroen C-crosser: Fitting and connecting the car radio
Let’s go to the most important section for you, how to install a car stereo on your Citroen C-crosser. Before you start, take the time to check the suitability of your car and your headunit, and to read the installation information, which may give you specific recommendations.
Here are the various steps required in installing an aftermarket car radio. Firstly, put in place the metal frame supplied with your new car radio, this frame has the job of holding your car radio in place on your Citroen C-crosser, once positioned, be sure you press the locking tabs on each side of the frame. Once this step has been carried out, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Citroen C-crosser, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Citroen C-crosser, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
If you wish more guides on the Citroen C-crosser, go to our Citroen C-crosser category.
