You’re uninterested in listening to cassettes and only having the capability to enjoy the radio, while your smartphone is full of your preferred music but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s specifically why we’ve created this content page to help you, because in this article you’re going to find out how to install a car radio on your Chrysler Sebring. To do this, initially we will find out how to remove the old car radio, then how to install a car radio on Chrysler Sebring and at last, how to connect it.
How to install car radio on Chrysler Sebring: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Chrysler Sebring, there is one necessary step, remove the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always don’t forget to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is carried out, here are the two techniques depending on the stereo that equips your Chrysler Sebring:
- Original car radio:
In this case, you’ll have to be persistent, in most cases, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your Chrysler Sebring. In truth, you will need to remove certain parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this situation the method is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Chrysler Sebring: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Chrysler Sebring. Beforehand, spend some time to verify the suitability of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various actions involved in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the task of holding your car radio in place on your Chrysler Sebring, once installed, don’t forget to press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Chrysler Sebring, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Chrysler Sebring, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
If you want more tutorials on the Chrysler Sebring, go to our Chrysler Sebring category.
