You’re uninterested in listening to cassettes and only having the capability to listent to the radio, while your phone is filled with your favourite tracks but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s exactly why we’ve written this content page to help you, because now you’re going to learn about how to install a car radio on your Chrysler 300. To achieve this, first we will discover how to remove the old car radio, then how to install a car radio on Chrysler 300 and at last, how to connect it.

install-car-radio-chrysler-300

How to install car radio on Chrysler 300: Removing the old car stereo

Before we get down to the serious business of how to install a car stereo on your Chrysler 300, there is one important step, take away the audio set you already have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start taking out, always don’t forget to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is completed, here are the two options based on the stereo that equips your Chrysler 300:

  • Original car radio:
    In this instance, you’ll have to be persistent, generally speaking, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Chrysler 300. In truth, you will need to remove certain parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections.
  • Aftermarket radio :
    In this situation the procedure is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Chrysler 300: Fitting and connecting the car radio

Let’s go to the essential section for you, how to install a car stereo on your Chrysler 300. Before you start, take the time to check the suitability of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various guidelines required in installing an aftermarket car radio. To begin with, put in place the metal frame provided with your new car radio, this frame has the job of holding your car radio in place on your Chrysler 300, once placed, don’t forget to press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Chrysler 300, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Chrysler 300, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.

If you need more guides on the Chrysler 300, go to our Chrysler 300 category.