You’re uninterested in listening to cassettes and only having the ability to listent to the radio, while your smart phone is loaded with your preferred music file but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car travels to the fullest… That’s exactly why we’ve written and published this content page to help you, because right now you’re going to find out how to install a car radio on your Chrysler 200. To make this happen, first of all we will see how to remove the old car radio, then how to install a car radio on Chrysler 200 and to finish, how to connect it.


How to install car radio on Chrysler 200: Removing the old car stereo

Before we start the serious business of how to install a car stereo on your Chrysler 200, there is one fundamental task, take off the audio set you already have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start dismantling, always be sure you remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is carried out, here are the two options dependent on the stereo that equips your Chrysler 200:

  • Original car radio:
    In cases like this, you’ll have to be patient, generally, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your Chrysler 200. In reality, you will need to remove certain parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections.
  • Aftermarket radio :
    In this circumstance the procedure is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve completed dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Chrysler 200: Fitting and connecting the car radio

Let’s go to the most important part for you, how to install a car stereo on your Chrysler 200. Before you start, spend some time to verify the suitability of your car and your headunit, and to read the installation information, which may give you specific recommendations.
Here are the various guidelines involved in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the job of holding your car radio in place on your Chrysler 200, once installed, be sure you press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Chrysler 200, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Chrysler 200, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t think twice to visit our page dedicated to it.

To discover more tips on the Chrysler 200, take a look at the Chrysler 200 category.