You’re sick and tired of listening to cassettes and only being able to listent to the radio, while your smart phone is full of your favourite music but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s precisely why we’ve created this content page to help you, because in this article you’re going to find out how to install a car radio on your Chevrolet Volt. To make this happen, first we will find out how to remove the old car radio, then how to install a car radio on Chevrolet Volt and to finish, how to connect it.
How to install car radio on Chevrolet Volt: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Chevrolet Volt, there is one imperative step, remove the audio set you already have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start taking out, always remember to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is done, here are the two techniques depending on the stereo that equips your Chevrolet Volt:
- Original car radio:
In this instance, you’ll have to be patient, generally, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Chevrolet Volt. Actually, you will need to remove certain auto parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this scenario the procedure is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Chevrolet Volt: Fitting and connecting the car radio
Let’s go to the essential step for you, how to install a car stereo on your Chevrolet Volt. Ahead of time, take some time to check the compatibility of your car and your headunit, and to read the installation information, which may give you specific guidelines.
Here are the various steps involved in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the task of holding your car radio in place on your Chevrolet Volt, once situated, remember to press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Chevrolet Volt, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Chevrolet Volt, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
If perhaps you have any additional questions about the Chevrolet Volt, do not hesitate to consult our Chevrolet Volt category.
