You’re sick and tired of listening to cassettes and only having the capacity to enjoy the radio, while your smartphone is loaded with your preferred music but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s specifically why we’ve made this article to help you, because now you’re going to learn about how to install a car radio on your Chevrolet Traverse. To accomplish this, first we will see how to remove the old car radio, then how to install a car radio on Chevrolet Traverse and finally, how to connect it.
How to install car radio on Chevrolet Traverse: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Chevrolet Traverse, there is one necessary step, take off the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always don’t forget to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is conducted, here are the two options dependent on the stereo that equips your Chevrolet Traverse:
- Original car radio:
In this case, you’ll have to be patient, in general, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Chevrolet Traverse. In actual fact, you will need to remove certain parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this circumstance the method is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Chevrolet Traverse: Fitting and connecting the car radio
Let’s go to the essential step for you, how to install a car stereo on your Chevrolet Traverse. Before you start, spend some time to examine the suitability of your car and your headunit, and to read the installation instructions, which may give you specific instructions.
Here are the various steps involved in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the task of holding your car radio in place on your Chevrolet Traverse, once situated, don’t forget to press the locking tabs on each side of the frame. Once this step has been carried out, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Chevrolet Traverse, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Chevrolet Traverse, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
To get more tips on the Chevrolet Traverse, take a look at the Chevrolet Traverse category.
